A-B Remote I/O

The EtherNet/IP to Allen-Bradley Data Highway Plus or Remote I/O Gateway provides solutions for some commonly encountered issues where Allen-Bradley PLC5s and SLC processors are connected to a Data Highway Plus or Remote I/O scanner. When used as a Data Highway Plus bridge this gateway enables HMIs, RSLogix 5, and RSLogix 500 software to connect and communicate to the processors. In addition to enabling remote programming or monitoring of these PLCs or SLCs this bridge can enable an Allen-Bradley CompactLogix controller to communicate to the PLC5s and SLCs on the Data Highway Plus network. When this gateway is configured as a Remote I/O scanner it enables a Programmable Automation Controller (PAC) to control a legacy Remote I/O system facilitating processor upgrades. This gateway allows a phased approach to be used when upgrading or replacing legacy PLC5 or SLC controllers. The gateway provides automatic detection of the Remote I/O baud rate and creation of the Remote I/O racks. Once Block Transfers are configured the Auto-Configuration feature creates RSLogix 5000 tags reducing engineering effort. Once the new PAC is commissioned the legacy I/O can be upgraded one module or one rack at a time as scheduled downtime is available. This gateway minimizes the risk of excessive downtime when upgrading legacy remote I/O systems.

The ProLinx family A-B Remote I/O Adapter to ASCII Generic Serial communications module creates a powerful connection between devices on a Remote I/O network and ASCII input devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and up to four ASCII configurable serial ports.

The ProLinx family A-B Remote I/O Adapter to DF1 Master/Slave communications module creates a powerful connection between devices on a Remote I/O network and DF1 devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and up to four serial ports.

The ProLinx family A-B Remote I/O Adapter to DH-485 communications module (5601-RIO-DH485) creates a powerful connection between devices on a DH-485 and Remote I/O networks. The module is a stand-alone DIN-rail mounted protocol gateway that provides one DH-485 configurable serial port and Remote I/O port.

The ProLinx family A-B Remote I/O Adapter to DNP 3.0 Master communications module (5601-RIO-DNPM) creates a powerful connection between devices on a DNP 3.0 Master network and Remote I/O devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one serial port and one RIO port.

The ProLinx family A-B Remote I/O Adapter to DNP 3.0 Slave communications module (5601-RIO-DNPS) creates a powerful connection between devices on a Remote I/O network and DNP devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one configurable serial port and one RIO port.

The ProLinx family A-B Remote I/O Adapter to HART Multi-drop communications module (5607-RIO-HART) creates a powerful connection between devices on a Remote I/O network and HART devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and four configurable HART Multi-drop channels.

The ProLinx family A-B Remote I/O Adapter to Honeywell DE Master communications module (5606-RIO-DEM) creates a powerful connection between devices on a Remote I/O network and Honeywell DE slave devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and eight Honeywell DE Master channels.

The ProLinx family A-B Remote I/O Adapter to IEC60870-5-101 Slave communications module (5601-RIO-101S) creates a powerful connection between devices on an IEC 101 network and a Remote I/O master device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and one IEC 101 Slave configurable serial port.

The ProLinx family A-B Remote I/O Adapter to IEC60870-5-103 Master communications module (5601-RIO-103M) creates a powerful connection between devices on an IEC 103 network and a Remote I/O master or slave device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and one IEC 103 Master configurable serial port.

The ProLinx family A-B Remote I/O Adapter to Modbus Master/Slave communications module (5601-RIO-MCM) creates a powerful connection between devices on a Remote I/O network and Modbus devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and up to four serial ports.

The ProLinx family A-B Remote I/O Adapter to PROFIBUS DP Master communications module (5604-RIO-PDPM) creates a powerful connection between devices on a Remote I/O network and a PROFIBUS slave device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and PROFIBUS DP Master configurable DB9F port.

The ProLinx family Allen Bradley Remote I/O Adapter to PROFIBUS DPV1 Master communications module (5604-RIO-PDPMV1) creates a powerful connection between devices on a Remote I/O network and PROFIBUS slave devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and a PROFIBUS DPV1 Master with a RS-485 9-pin D shell female connector interface with optically-isolated couplers.

The ProLinx family A-B Remote I/O Adapter to PROFIBUS DPV0 Slave communications module (5605-RIO-PDPS) creates a powerful connection between devices on a Remote I/O network and a PROFIBUS master device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Remote I/O port and one PROFIBUS DPV0 Slave configurable DB9F port.

The ProLinx family DNP over Ethernet to Remote I/O communications module (5210-DNPSNET-RIO) creates a powerful connection between devices on a DNP over Ethernet network and Remote I/O devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port and one Remote I/O port.

The ProLinx family EtherNet/IP to A-B Remote I/O Adapter communications module (5210-DFNT-RIO) creates a powerful connection between devices on an EtherNet/IP network and Remote I/O devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port and one Remote I/O port.

The ProLinx family IEC60870-5-104 Server to A-B Remote I/O Adapter communications module (5210-104S-RIO) creates a powerful connection between devices on an IEC 104 Server network and Remote I/O devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port and one Remote I/O port.

The ProLinx family Modbus Plus to A-B Remote I/O Adapter communications module (5310-MBP-RIO) creates a powerful connection between devices on a Modbus Plus network and a Remote I/O device. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Modbus Plus configurable DB9F port and Remote I/P port.

The ProLinx family Modbus TCP/IP to A-B Remote I/O Adapter communications module (5210-MNET-RIO) creates a powerful connection between devices on a Modbus TCP/IP network and Remote I/O devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port and one Remote I/O port.