EtherNet/IP

The ProLinx EtherNet/IP to BACnet/IP Client Edition 2 gateway creates a powerful connection between devices on an EtherNet/IP network and BACnet devices. This stand-alone DIN-rail mounted protocol gateway provides a single Ethernet port.

The ProLinx EtherNet/IP to IEC60870-5-104 Client gateway creates a powerful connection between an EtherNet/IP network and IEC 104 server devices. The stand-alone, DIN-rail-mounted protocol gateway provides one Ethernet port.

The EtherNet/IP protocol supports the Explicit Messaging implementation of the protocol (PCCC-type messages). User-configurable as both a Client and a server, the EtherNet/IP port is a very powerful data transfer tool.

The IEC60870-5-104 Client protocol implementation allows the transfer of monitor and control data to and from remote servers.

The ProLinx family DH-485 to EtherNet/IP communications module (5201-DFNT-DH485) creates a powerful connection between devices on EtherNet/IP and DH-485 networks. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Ethernet port and one DH-485 configurable serial port.

The EtherNet/IP to Allen-Bradley Data Highway Plus or Remote I/O Gateway provides solutions for some commonly encountered issues where Allen-Bradley PLC5s and SLC processors are connected to a Data Highway Plus or Remote I/O network. When used as a Data Highway Plus bridge this gateway enables HMIs, RSLogix 5, and RSLogix 500 software to connect and communicate to the processors. In addition to enabling remote programming or monitoring of these PLCs or SLCs this bridge can enable an Allen-Bradley CompactLogix controller to communicate to the PLC5s and SLCs on the Data Highway Plus network. When this gateway is configured as a Remote I/O scanner it enables a Programmable Automation Controller (PAC) to control a legacy Remote I/O system facilitating processor upgrades. This gateway allows a phased approach to be used when upgrading or replacing legacy PLC5 or SLC controllers. The gateway provides automatic detection of the Remote I/O baud rate and creation of the Remote I/O racks. Once Block Transfers are configured the Auto-Configuration feature creates RSLogix 5000 tags reducing engineering effort. Once the new PAC is commissioned the legacy I/O can be upgraded one module or one rack at a time as scheduled downtime is available. This gateway minimizes the risk of excessive downtime when upgrading legacy Remote I/O systems.

The ProLinx family EtherNet/IP to A-B Remote I/O Adapter communications module (5210-DFNT-RIO) creates a powerful connection between devices on an EtherNet/IP network and Remote I/O devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port and one Remote I/O port.

The ProLinx family EtherNet/IP to ASCII Generic Serial communications module creates a powerful connection between devices on an EtherNet/IP network and ASCII devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides a single Ethernet port and up to four ASCII configurable serial ports.

The ProSoft Technology EtherNet/IP to CC-Link communication gateway allows Rockwell Automation control platform users to integrate CC-Link Master compatible products with existing EtherNet/IP control networks.

The ProLinx family EtherNet/IP to DF1 Master/Slave communications module (5201-DFNT-DFCM) creates a powerful connection between devices on an EtherNet/IP network and DF1 devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one ethernet port and up to four serial ports.

The ProLinx family EtherNet/IP to DNP 3.0 Master communications module (5201-DFNT-DNPM) creates a powerful connection between devices on an EtherNet/IP network and DNP Master devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one ethernet port and one serial port.

The ProLinx family EtherNet/IP to DNP 3.0 Slave communications module (5201-DFNT-DNPS) creates a powerful connection between devices on an EtherNet/IP network and DNP Slave devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one ethernet port and one serial port.

The ProLinx family EtherNet/IP to DNP over Ethernet communications module (5201-DFNT-DNPSNET) creates a powerful connection between devices on EtherNet/IP and DNP over Ethernet networks. The module, encased in aluminum (ProLinx Plus 5000 series), is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port.

The ProLinx EtherNet/IP to Garvens Remote Control Hi-Speed Checkweigher Gateways create a powerful connection between devices on an EtherNet/IP network and Garvens high speed checkweighers. The module provides a single Ethernet port and up to four configurable serial ports.

The ProLinx EtherNet/IP to GE Ethernet Global Data Gateway creates a powerful connection between EtherNet/IP and GE Ethernet Global Data networks. The module provides one Ethernet port.

The EtherNet/IP to GE Genius gateway allows an Allen-Bradley Programmable Automation Controller (PAC) to control GE Genius I/O devices. This gateway allows a phased migration approach to be used when upgrading or replacing GE Genius based 90 -30s and 90 -70s controllers. The gateway provides automatic creation of the Genius scan-list and generates the associated RSLogix 5000 tags reducing engineering effort. Monitor mode allows verification of your conversion logic using live I/O data without impacting the running legacy system. Once the new PAC is commissioned the legacy I/O can be upgraded one module or one rack at a time as scheduled downtime is available. This gateway minimizes the risk of excessive downtime when upgrading legacy control systems

The ProLinx family EtherNet/IP to HART Multi-drop communications module (5207-DFNT-HART) creates a powerful connection between devices on an EtherNet/IP network and HART Multi-drop devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Ethernet port and four HART Multi-drop channels.

The HART Analog Input Gateway provides a clean way to integrate HART Analog instruments with existing controller platforms on an EtherNet/IP network. The gateway works well for field applications where it can be installed closer to HART instrument, saving on copper cable and installation costs. The gateway also saves valuable rack space for other in-chassis options. The gateways provide extremely fast channel update times (all channels updating simultaneously in 67 ms) making the HART Analog Input Gateway ideal for applications where high speeds and point-to-point connectivity are required. These gateways are available in 4 and 8 Analog input channel options.

The ProLinx family EtherNet/IP to Honeywell DE Master communications module (5206-DFNT-DEM) creates a powerful connection between devices on an EtherNet/IP network and Honeywell DE slave devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port and eight Honeywell DE Master channels.

The ProLinx family EtherNet/IP to IEC60870-5-103 Master communications module (5201-DFNT-103M) creates a powerful connection between devices on an EtherNet/IP network and an IEC 103 slave device. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Ethernet port and one IEC 103 Master configurable serial port.

The ProLinx family EtherNet/IP to IEC60870-5-104 Server communications module (5201-DFNT-104S) creates a powerful connection between an EtherNet/IP network and IEC 104 master devices. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port.

The ProLinx family EtherNet/IP to Modbus Master/Slave communications module (5202-DFNT-MCM4) creates a powerful connection between devices on an EtherNet/IP network and Modbus devices. The module is a stand-alone DIN rail-mounted protocol gateway that provides one ethernet port and up to four serial ports.

The ProLinx family EtherNet/IP to Modbus TCP/IP communications module (5201-MNET-DFNT) creates a powerful connection between Modbus TCP/IP and EtherNet/IP networks. The module is a stand-alone DIN-rail mounted protocol gateway that provides one Ethernet port.

The ProLinx EtherNet/IP to PROFIBUS DPV1 Master Gateway creates a powerful connection between devices on an EtherNet/IP network and a PROFIBUS slave device. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and PROFIBUS DP Master configurable DB9F port.

The ProLinx family EtherNet/IP to PROFIBUS DP Slave communications module (5205-DFNT-PDPS) creates a powerful connection between devices on an EtherNet/IP network and a PROFIBUS master device. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Ethernet port and one PROFIBUS DP Slave configurable DB9F port.

The ProLinx family Modbus Plus to EtherNet/IP communications module (5303-MBP-DFNT) creates a powerful connection between devices on an EtherNet/IP network and a Modbus Plus device. The module is a stand-alone DIN rail-mounted protocol gateway that provides one Modbus Plus configurable DB9F port and one Ethernet port.

The ProLinx Modbus TCP/IP Multi-Client to EtherNet/IP Gateway creates a powerful connection between Modbus TCP/IP and EtherNet/IP networks. The module provides one Ethernet port.

The EtherNet/IP to Modicon S908 gateway allows an Allen-Bradley Programmable Automation Controller (PAC) to control Modicon S908 I/O devices. The gateway allows a phased migration approach to be used when upgrading an S908 based Modicon 984, 584, or Quantum control system. The gateway provides automatic creation of the S908 scan-list and generates the associated RSLogix 5000 tags reducing engineering effort. Monitor mode allows verification of your conversion logic using live I/O data without impacting the running legacy system. Once the new PAC is commissioned the legacy I/O can be upgraded one module or one rack at a time as scheduled downtime is available. This gateway minimizes the risk of excessive downtime when upgrading legacy control systems

QuickServer, by FieldServer, is a high performance, fully configurable, cost effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants.

The EtherNet/IP to Texas Instruments Remote I/O Master gateway allows an Allen-Bradley Programmable Automation Controller (PAC) to control TI 505 Remote I/O. This gateway allows a phased migration approach to be used when upgrading or replacing TI Remote Base Controllers. The gateway provides automatic creation of the TI Remote I/O scan-list and generates the associated RSLogix 5000 tags reducing engineering effort. Once the new PAC is commissioned the legacy I/O can be upgraded one module or one rack at a time as scheduled downtime is available. This gateway minimizes the risk of excessive downtime when upgrading legacy control systems.